TOP OF THE RANGE AT THE BEST PRICE – COMPARE US AND YOU WILL BE COMPLETELY CONVINCED

Opaque model

30.00$

See features

  • Fabric:
    100% polyester
  • Lift control:
    Safety Plus chain guard, automatic chain-free lift, battery-powered motor (extra)
  • Dimensions:
    – Minimum width: 12″
    – Maximum width: 94″ (72″ with automatic lift)
    – Minimum height: 12″
    – Maximum height: 94″ (58″ with automatic lift)

Installation inside frame:
Do not make deductions. The manufacturer will make sure to make them for a perfect fit. The fabric will be approximately 1/8″ less wide on each side than the measurement given due to the mechanism. The frame must be a minimum of 2 ½” deep.

Outside frame installation:
The blind will be the same width as ordered and the fabric will measure approximately 1/8″ less on each side than the width ordered. Therefore, for example, if the space to be covered is 60″, it is prudent to order a 60 1/4″ fabric to ensure that the entire frame is covered.

Customizing your Honeycomb blinds – Opaque model

STEP 1

Measurements

PREVIOUS STEP NEXT STEP

Number of panels

PREVIOUS STEP NEXT STEP

Track color

PREVIOUS STEP NEXT STEP

Valance - Shape

PREVIOUS STEP NEXT STEP

Valance - Color

PREVIOUS STEP NEXT STEP

Window Location

PREVIOUS STEP NEXT STEP
Use the buttons PREVIOUS STEP or NEXT STEP to skip to change steps, if you use the arrows of the browser, the system will not be able to correctly calculate the price of your product.

TOTAL ORDER PRICE

0.00 $

Regular price

0.00 $

You are saving

70%

ORDER SUMMARY

Honeycomb blinds
Opaque model
  • Fabric - Color:
  • Width:
  • Height:
  • Opacity:
  • Number of panels:
  • Panel width:
  • Track:
  • Track color:
  • Valance - Shape:
  • Valance - Color:
  • Window - Patio door:
  • Installation type:
  • Mechanism:
  • Stick control:
  • Control (right - left):
  • Location:
  • Comments:
ADD TO CART Allow 3-4 weeks for delivery

ORDER YOUR SAMPLES

Our measuring tips

Single Window - Interior

The prerequisite for this type of installation requires a clearance of 2 inches deep from the frame without obstacle to the bottom of the frame. The measurement of the width must be taken only at the top of the frame, this canvas when descending leaves +/- 1/2 inch of clearance on each side of the canvas when descending.

It is very important to take the height in three different places like figure-1 below and keep the smallest measurement. The alternating shade is made so that it comes 1/8 inch from the bottom of the frame in the privacy position, and will rise a little in the daytime position, which aligns the curtains so that they can see the outside.

Single window - Exterior

mesures-fenetres-02

If you want the box of the alternating canvas to be equal to your frame, you simply take the outside measurement of the frame on the width and if you want to completely cover your frame with the canvas then you must add 2 inches to this measurement.

For the height you have 2 options, so if you want to install the case of the alternating canvas on the frame then take the outside measurement of the frames on the height. However, if the box is installed at the top of the frame, you must add 3 inches to this measurement.

Our achievements

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.